These 3/4" Diameter Pins fit our Heavy Duty Double and Single Strap Hinges, Adjustable Bottom Fitting, and Adjustable Gate Eyes.
 

• 12" Threaded Adjustable Pin
• Nut on Both Sides of Post to Permit Easy Adjustment of the Distance Between the Pin and the Post
• Available in Hot Dipped Galvanized or Black Powder Coat over Hot Dipped Galvanized Finish
• 3 lbs. each
• Sold Individually
• Price Includes UPS Shipping within the Continental USA

  12" Threaded Adjustable Pin (3/4") - Galvanized
  8800-002 - $18.48 Ea. - Add to Cart I View Cart

  12" Threaded Adjustable Pin (3/4") - Black
  8800-00P - $21.83 Ea. - Add to Cart I View Cart
 

• 13" Field Gate Pin
• Traditional English Pin has Square Shaft at Pin End and has 3/4" Thread at Other End
• When Drawn into the Wood Post it Will Not Rotate
• Ideal When Gate Mounted Behind the Posts
• Suitable for Posts 6 to 9 Inches Thick
• Hot Dipped Galvanized Finish
• 3 lbs. each
• Sold Individually
• Price Includes UPS Shipping within the Continental USA

  13" Field Gate Pin to Bolt - Galvanized
  8317-002 - $19.85 Ea. - Add to Cart I View Cart
 

• Gate Hanger on 4" Square Plate
• Can be Lag Bolted to Post, Connected with Lengths of Threaded Rod through Posts, or Welded to Steel Post
• No Adjustment
• Often Suited to Retrofits
• Available in Hot Dipped Galvanized or Black Powder Coat over Hot Dipped Galvanized Finish
• 2 lbs. each
• Sold Individually
• Price Includes UPS Shipping within the Continental USA

  Gate Hanger on 4" Plate - Galvanized
  8254-342 - $20.95 Ea. - Add to Cart I View Cart

  Gate Hanger on 4" Plate - Black
  8254-34P - $24.80 Ea. - Add to Cart I View Cart
 

• Adjustable Gate Hanger on 4" Square Plate
• Can be Lag Bolted to Post, Connected with Lengths of Threaded Rod through Posts, or Welded to Steel Post
• Adjustable Pin Length
• Drill a 1" Diameter Hole 1-1/2" to 2" Deep into the Post behind the Plate so Pin can be Adjusted back into Post
• Often Suited to Retrofits
• Hot Dipped Galvanized Finish
• 2 lbs. each
• Sold Individually
• Price Includes UPS Shipping within the Continental USA

  Adjustable Gate Hanger on 4" Plate - Galvanized
  8255-342 - $23.15 Ea. - Add to Cart I View Cart
 

• Gate Hangers for Masonry or Stone
• Designed to be Built into New Construction Masonry
• Arms are 12" Long from Center of Pin
• Arms can be Bent to Conform to Stone Work
• Check with Plumb when Installing
• No Adjustment when Completed
• Hot Dipped Galvanized Finish
• 3 lbs. each
• Sold Individually
• Price Includes UPS Shipping within the Continental USA

  Gate Hanger for Brickwork - Galvanized
  8257-342 - $22.99 Ea. - Add to Cart I View Cart
 

• Pin to Screw
• 3/4" Pin with 7" Threaded Shaft
• This Pin does offer an alternative to full Bolts but it is not as strong or reliable as a Pin that is bolted through the entire Post and held with a Washer and Nut.
• Available in Hot Dipped Galvanized or Black Powder Coat over Hot Dipped Galvanized Finish
• 2 lbs. each
• Sold Individually
• Price Includes UPS Shipping within the Continental USA

  7" Pin to Screw (3/4") - Galvanized
  8308-072 - $18.48 Ea. - Add to Cart I View Cart

  7" Pin to Screw (3/4") - Black
  8308-07P - $21.78 Ea. - Add to Cart I View Cart